A limited LCA of bio-adipic acid: manufacturing the nylon-6,6 precursor adipic acid using the benzoic acid degradation pathway from different feedstocks.
Cast your vote
You can rate an item by clicking the amount of stars they wish to award to this item.
When enough users have cast their vote on this item, the average rating will also be shown.
Your vote was cast
Thank you for your feedback
Thank you for your feedback
MetadataShow full item record
AbstractA limited life cycle assessment (LCA) was performed on a combined biological and chemical process for the production of adipic acid, which was compared to the traditional petrochemical process. The LCA comprises the biological conversion of the aromatic feedstocks benzoic acid, impure aromatics, toluene, or phenol from lignin to cis, cis-muconic acid, which is subsequently converted to adipic acid through hydrogenation. Apart from the impact of usage of petrochemical and biomass-based feedstocks, the environmental impact of the final concentration of cis, cis-muconic acid in the fermentation broth was studied using 1.85% and 4.26% cis, cis-muconic acid. The LCA focused on the cumulative energy demand (CED), cumulative exergy demand (CExD), and the CO(2) equivalent (CO(2) eq) emission, with CO(2) and N(2) O measured separately. The highest calculated reduction potential of CED and CExD were achieved using phenol, which reduced the CED by 29% and 57% with 1.85% and 4.26% cis, cis-muconic acid, respectively. A decrease in the CO(2) eq emission was especially achieved when the N(2) O emission in the combined biological and chemical process was restricted. At 4.26% cis, cis-muconic acid, the different carbon backbone feedstocks contributed to an optimized reduction of CO(2) eq emissions ranging from 14.0 to 17.4 ton CO(2) eq/ton adipic acid. The bulk of the bioprocessing energy intensity is attributed to the hydrogenation reactor, which has a high environmental impact and a direct relationship with the product concentration in the broth.
CitationA limited LCA of bio-adipic acid: manufacturing the nylon-6,6 precursor adipic acid using the benzoic acid degradation pathway from different feedstocks. 2011, 108 (6):1298-306 Biotechnol. Bioeng.
AffiliationWageningen UR Food & Biobased Research, Wageningen, The Netherlands. firstname.lastname@example.org
JournalBiotechnology and bioengineering
The following license files are associated with this item:
- Toward biotechnological production of adipic acid and precursors from biorenewables.
- Authors: Polen T, Spelberg M, Bott M
- Issue date: 2013 Aug 20
- Benzene-free synthesis of adipic acid.
- Authors: Niu W, Draths KM, Frost JW
- Issue date: 2002 Mar-Apr
- From lignin to nylon: Cascaded chemical and biochemical conversion using metabolically engineered Pseudomonas putida.
- Authors: Kohlstedt M, Starck S, Barton N, Stolzenberger J, Selzer M, Mehlmann K, Schneider R, Pleissner D, Rinkel J, Dickschat JS, Venus J, B J H van Duuren J, Wittmann C
- Issue date: 2018 May
- Comparative life-cycle assessments for biomass-to-ethanol production from different regional feedstocks.
- Authors: Kemppainen AJ, Shonnard DR
- Issue date: 2005 Jul-Aug
- Biosynthesis of adipic acid via microaerobic hydrogenation of cis,cis-muconic acid by oxygen-sensitive enoate reductase.
- Authors: Sun J, Raza M, Sun X, Yuan Q
- Issue date: 2018 Aug 20